一、請說明海上貨物運送人的責任基礎？以及貨損求償的舉證順序？（25 分）

二、請說明船舶適航性義務的意義？違反效果？以及船舶適航性如何舉證？ （25 分）

一、請將下列英文翻譯成中文： （20分） Surveyor’s Report The surveyor should inspect the damage, preferably in conjunction with the other interested parties, so that he is able to give a detailed description. Photographs and/or sketches may assist to clarify certain points and should, where permitted, always be included in the report. If the surveyor is unsure of the cause of damage, he should request additional information from the Master/Owner's representative or investigations/tests be done to remove the uncertainty. If the requests are not complied with, the surveyor must report the facts to his principal and include the matter in his final report.

二、請將下列英文翻譯成中文： （20分） Vessel SurveysThe following damage was found: 1. Numerous indentations on hatch coamings. 2. Angle stiffener above opening in port bulwark adjacent No.1 hatch - sharply bent 25 mm over 160 mm. 3. Derrick crutch tower between Nos. 1 & 2 hatches sharp indents 40 x 40 x 15 mm. 4. Ballast line athwartships between Nos. 2 & 3 hatches outside entrance door - flattened over 300 mm length x 20 mm. 5. Tank top, midships 7 m abaft bulkhead - large area depression 1000 x 2000 x25 mm.

三、請將下列英文翻譯成中文： （20分） Cargo SurveysSweat is a complex business to prove, although simple enough in concept. It is condensation caused by changes in temperature and moisture content of the air in the hold in relation to the cargo or the ship's structure. The surveyor should understand the mechanics of its occurrence, check on routes, temperatures when loading and enroute, and ventilation. Stowage is important to minimising sweat damage; for instance inadequate dunnaging may cause cartons to become waterlogged.

四、請將下列英文翻譯成中文： （20 分） Liability Surveys The largest employer of surveyors for Pre-shipment cargo surveys is the steel trade. Steel gives rise to high claims, so P&l Clubs insist on pre-shipment surveys to protect themselves. The surveyor needs more a knowledge of steel than of ships. And he needs stamina. The intention is to sight all the steel to be loaded and note any defects. These will include degrees of rusting, crushing or deformation of coils, bending or deformation of girders and plates, exposure to salt spray or rain, especially for cold-rolled coils, and more especially in ports where the air is very polluted.

(一)公證人應該意識到他的經驗和資格的限制，在沒有諮詢他的委託人的 情況下，不應該超出其職權範圍。

(二)艙口蓋的裂漏、管道或油艙或人孔蓋的洩漏、雨中裝載、中途港口下 雨、其它貨物的洩漏，或汗濕等，都有可能造成貨物水濕損害的原因。

一、請說明食品工廠在廠房布置規劃（facilities layout planning）時常採用的 系統布置規劃法（systematic layout planning, SLP）之意涵及實施步驟。 （25 分）

二、請說明食品工廠生產線之品質管制作業中，製程品質管制圖（quality control chart）之意涵，包括其目的及使用上的限制，並舉出 3 種常用的 計量值管制圖加以說明之。 （25 分）

三、何謂生產排程？並請說明食品工廠進行生產排程計畫時所使用之甘特 圖（gantt chart）及平衡線圖（line of balance, LOB）之特點。 （25 分）

114年 - 114 專技普考_海事保險公證人：海商法概要#127488

113年 - 113 專技普考_海事保險公證人：海商法概要#120263

112年 - 112 專技普考_海事保險公證人：海商法概要#114614

111年 - 111 專技普考_海事保險公證人：海商法概要#108360

110年 - 110 專技普考_海事保險公證人：海商法概要#101340

109年 - 109 專技普考_海事保險公證人：海商法概要#86675

108年 - 108 專技 海商法概要#76574

107年 - 107專技普考 - 海商法概要#69694

106年 - 106年專技普考-海商法概要#62926

105年 - 105年保險代理經紀公證人普通海商法概要#52562