8. (10%) Determine the change of \( V{\text{out}} \) in Fig. 8 if the input is changed by \( \Delta V{\text{in}} \)?

9. (10%) Explain the operational principle of an n-channel MOSFET from the effect that is induced by electrical field. (a) How does \( V{GS} \) control \( I{DS} \)? (b) How does \( V{DS} \) control \( I{DS} \)?

10. (10%) (a) For an npn bipolar transistor, which terminal (emitter, base or collector) requires a high doping concentration, explain why? (b) Should the base-collector junction \( V_{BC} \) be forward biased or reverse biased, explain why?

1. (10%) For the circuit shown in Fig. 1, specify the resistance \( R \) that will cause current \( i_{\mathrm{b}} \) to be \( 1.33\mathrm{mA} \) by the method of Thévenin theorem.

2. (15%) For the \( 2^{\text{nd}} \) order circuit shown in Fig. 2, find the complete response \( v(t) \), including both the components of natural response and forced response, of the circuit for \( t > 0 \) when \( v(0) = 9\mathrm{V} \) and \( i_{\mathrm{L}}(0) = 0\mathrm{A} \).

3. (10%) Wheatstone bridge based circuits are often applied in sensor devices and offer possible ways to transfer resistive sensor measurements into electrical signals. A Wheatstone bridge based Op-amp circuit, shown as Fig. 3, was devised to transfer the resistive sensor \( R{1} \) to the output voltage \( v{0} \). Determine the value of \( v{0} \) when \( R{1} = 10\mathrm{k}\Omega \).

4. (15%) While \( V{C} \) denotes the DC component of the output voltage, \( v{0} \) and \( v{1} \) denote the AC components of the output and input voltages. Determine the small-signal voltage gain \( A{\nu} = v{0} / v{1} \) of the BJT amplifier shown in Fig. 4. Assume the thermal voltage \( V{\mathrm{T}} = 25\mathrm{mV} \), \( V{\mathrm{BE}} = 0.7\mathrm{V} \), \( \beta = 100 \).

5. (10%) Determine the output voltage \( v{0} \) of the circuit shown in Fig. 5. Assume the threshold voltage of the NMOS transistor \( V{\mathrm{TH}} = 1\mathrm{V} \), its transconductance parameter \( k{n} = \mu{n}C_{\mathrm{ox}}(W / L) = 1\mathrm{mA} / \mathrm{V}^{2} \), and neglect the channel-length modulation effect \( \lambda = 0 \).

6. (20%) Determine the small-signal voltage gain \( A{s} \) of the MOS amplifier shown in Fig. 6. The transistor has \( V{\mathrm{TH}} = 3\mathrm{V} \), \( k{n} = \mu{n}C{\mathrm{ox}}(W / L) = 0.25\mathrm{mA} / \mathrm{V}^{2} \) and \( \lambda = 0.02\mathrm{V}^{-1} \), and assume that the coupling capacitors \( C1 \) and \( C2 \) are sufficiently large to shorten the AC signals at their frequencies of interest, and \( A{s} \equiv -g{m}R{L} \), where \( R_{L} \) is AC equivalent resistance.

7. (10%) For the Op-Amp differentiator shown in Fig. 7, show the relation between the input and output as:$$V{\mathrm{out}} = -RC \frac{dV{\mathrm{in}}}{dt}$$

8. (10%) Suppose the sinusoidal voltage and current across an circuit component are $v(t) = V{\mathrm{in}} \cos(\omega t + \theta{\mathrm{v}})$ and $i(t) = I{\mathrm{in}} \cos(\omega t + \theta{\mathrm{i}})$, respectively. Show the average power (over a complete period) delivered to the component is$$P = \frac{V{\mathrm{in}} I{\mathrm{in}}}{2} \cos(\theta{\mathrm{v}} - \theta{\mathrm{i}})$$

115年 - 115 台灣電力公司_大學及研究所獎學金甄選_智慧配電物聯網：物聯網系統#147326

115年 - 115 台灣電力公司_大學及研究所獎學金甄選_核工：核工原理#147323

115年 - 115 台灣電力公司_大學及研究所獎學金甄選_地質模擬與風險分析：普通地質學#147320

115年 - 115 國立臺北大學_碩士班一般入學考試試題_資訊工程學系：線性代數與離散數學#147267

114年 - 114 國立臺北大學_碩士班一般入學考試試題_資訊工程學系：線性代數與離散數學#147271

114年 - 114 國立臺北大學_碩士班一般入學考試試題_民俗藝術與文化資產研究所：語文論述能力(民俗與文化)#147240

113年 - 113 國立臺北大學_碩士班一般入學考試試題_資訊工程學系：線性代數與離散數學#147270

113年 - 113 國立臺北大學_碩士班一般入學考試試題_民俗藝術與文化資產研究所：語文論述能力(民俗與文化)#147238

112年 - 112 國立臺北大學_碩士班一般入學考試試題_民俗藝術與文化資產研究所：語文論述能力(民俗與文化)#147239

111年 - 111 國立臺北大學_碩士班一般入學考試試題_資訊工程學系：線性代數與離散數學#147257